10.0°E Eutelsat 10B

[dx qwer]

One more appeared, after 3944 R yesterday:

3946 R 2083 3/5 DVB-S2 8PSK, AIT NEws (Nigeria)

PS: Starting a new toppic for this satellite, in hope it´s okay.

 

[dx qwer]

Just changed from 3918 R to:
3855 R 6479 3/4 DVB-S2 8PSK. New World TV (Togo)

 

[dreamsat]

3837 R 1650 DVBS2/8PSK 5/6 (Endcoder Programm)

A video pid is displayed but only audio works

 

[vma]

Always worth testing with the MPE/IP mode and taking a look with the DATA mode. Use the Raw or Payload mode and look at the HEX/ASCII data.

 

[dreamsat]

Thanks for the tip, but I'm not really getting anywhere. I was on vacation for 14 days and haven't been able to follow the program's development closely. Do you have any other ideas?

 

[vma]

Not really, but note that the interesting stuff (video and audio) require lots of packets, so those entries with most packets are the ones you should focus on.

The MPE/IP tab does reveal that there is nothing useful embedded as IP packets - far too few bytes.

In the DATA tab, my bet would go to PID 481, which is the one carrying most data. You can dump this PID as a file (RAW or PAYLOAD) and then analyse it with a hex editor, 7zip and VLC. Chances are low, but you never know.

Last resort is open the RAW dump with Wireshark.

It is a lot of work and honestly, chances are low you will be able to decode anything. But still, I don't know any better way.

 

[AtOM13]

Lock 4028 R 1515 on 10e C band ,100 cm dish and C138 Lnb