Advice Needed C120 PLL Universal Ku LNB (Where to get)

[satesco]

How much does this Inverto Pro with flange cost and with what results compared to IBU?
Has anyone tested the two Inverto?
Thanks.

 

[s-band]

How much does this Inverto Pro with flange cost and with what results compared to IBU?
Has anyone tested the two Inverto?
Thanks.

That one is not currently manufactured. The best price on the 4 output ones is here:

Advice Needed - C120 PLL Universal Ku LNB (Where to get)

I've put C120 flanges on a few offset feed universal LNBs with their feed cut off but none seem to give a very good match due to WG size differences. One of the better ones was a Sky LNB but that doesn't work well with TBS cards. That's not a universal, of course, and is not usable below 900MHz...

satellites.co.uk

I haven't a clue what the conditions were but probably on a 1.5m on 10E & 1W. Here are some results from an IBU vs. Invacom dated 2017. I've also included some results from the Inverto vs. a Sky Q fitted with C120.

 

[Tomek22]

There are a couple of flange LNBs for sale @ satclub.pl forum. Do not know the price as seller did not say that.

Hello @RimaNTSS
I already sold those two inverto c120 single

Im looking also for any good TWIN LNB.

Now im waiting for this DUR-line Twin to arrive.
Need to cut original feed to match this lnb to C120 parabolic dish. We will see how good this lnb is

Now i have black inverto pro c120 twin which is very average...

Maybe we can make one big order from inverto to get those new PLL single and twin in normal price?
Twin Universal PLL Flange LNB
IDLP-TWLFOO-OOPRO-OPN
Item: 5938

Single Universal PLL Flange LNB
IDLP-SNLFOO-OOPRO-OPN
Item: 5937

or those are still not manufactured?

 

[satesco]

...

I haven't a clue what the conditions were but probably on a 1.5m on 10E & 1W. Here are some results from an IBU vs. Invacom dated 2017. I've also included some results from the Inverto vs. a Sky Q fitted with C120.

Thanks for the tests presented. They are eloquent for those interested in an lnb capable of better performance than the ones they tried.
For this reason, I wanted to know the differences, even if minimal, between Inverto with Flange and IBU because, over the years, I have worked with many LNBs, among others, with the famous Invacom.
I have also tested Inverto single(white and black) with remarkable results. Unfortunately, I could not eliminate Ku-band interference with white lnb, which attenuated my signal.
I found some scalar rings on Aliexpress that I posted somewhere on this forum, but I can't find my post.
That's why I've shown the differences between Inverto White with made-up rings and Inverto with all Aliexpress scalar rings.
I don't think that the scalar rings boosted my signal, but rather, they remove as much noise as possible from the useful signal.
(Sorry to post pictures of these IBU and scalar rings again.)

 

[danny10]

Where to buy the C120 flange?

 

[s-band]

Where to buy the C120 flange?

@John and I used ones removed from dead Invacom LNBs like this one:

Invacom SNF-031 Single Universal LNB, C120 flange connection

Excellent quality flange LNB for primefocus satellite antennas.

www.satshop.fi

See this thread Help Required - Ku C-120 flange only

 

[Tomek22]

my dur-line twin is already cutted
the polarization probes are soldered perfectly! inverto should take a lesson.

red line is where i cut. last photo after cut good visibility for probes.

neck diameter 20mm outside and around 17mm inside.

now its only time to test it on mabo 180

 

[Captain Jack]

@Trust I believe used to machine them from scratch. I have one somewhere that was used with my Fibo and IBU converted...

 

[Channel Hopper]

A Racal polarotor, mid 90s I think.

I will dismantle this weekend and see if it can be mated to other stuff (oooerr!)

 

[Satfaca]

It's a magnetic polarotor, always performed marginal to a mechanical one. But it is a part of the history and contributed to the evolvement of sat tv.

 

[Channel Hopper]

It's a magnetic polarotor, always performed marginal to a mechanical one. But it is a part of the history and contributed to the evolvement of sat tv.

It was crap, but the flange may yet be useful.

 

[Channel Hopper]

It was crap, but the flange may yet be useful.

And on that note, some initial dismantling, if there is a thread then it is somewhat locked up requiring a vice.

The work may also be useful for the other thread.

mechanical polarotor

I wanted to build a mechanical system that turns an LNB or an orthomode. the mechanical part was simple: a set of robotic parts found on ALI. the motor is 12v but it exists in 6v and 24v. there are 5V HALL sensors. I am creating a printed card which will be quite close to the diagram of a V-BOX...

www.satellites.co.uk

 

[Channel Hopper]

Well, if it is threaded then it's not currently moving, even with the LNB in a vice and a crowbar between two screwdrivers in the upper holes.

So it's now immersed in a pot of paintstripper for a day or two.

 

[Channel Hopper]

And, the painstripper removed the paint, but still no budging (if it is a threaded system).

 

[Channel Hopper]

Heating didn't help either, apart from turning the ferrite holder into a mass of boiling glue. So I started cutting away to see what is inside.

The throat on this is just over 10mm, which may explain why they were lossy at low frequencies.

 

[Channel Hopper]

Even in a vice there was no movement so without further ado a few cuts later.

It's a single cast unit, possibly useful if the centre can be reamed out to a decent diameter (and if you can find one).

 

[AtOM13]

DMM-TV | ATEC

Serious seller , already buy from him .

 

[satesco]

An exciting topic dedicated to some lnb's and practical solutions to better capture the signal.
Each would be a solution for those who want to receive weak signals specifically.

But what may convince us that the solutions proposed here are the signal tests related to other lnb or the same lnb but with an "artifact" added?
So, I would like to see if there is a causal relationship between the technical solution found and the result obtained. I mean more spectra.

For example, I worked with white and black IBU lnb with flange, as in the previous picture, but the white is a bit more sensitive than the black one.
But I got the best signal with the IBU with scalar rings, not flange ones. (see#24)

 

[AtOM13]

I bought a Laminas Ku feedhorn and I want to adapt my single Megasat Diavolo V1 on it , someone already made it ?

 

[Channel Hopper]

I bought a Laminas Ku feedhorn and I want to adapt my single Megasat Diavolo V1 on it , someone already made it ?

Since you have everything needed, go ahead and let us know your results.