hang on " sending TRAPCODE" and a new titanium card

OK ...If you can go to Dudez or the Den and download The latest TMB file from the Conax section ( TMB 2.6 ). When you unzip it you will find two folders, one is the TMB file the other is the latest TMB editor which has a TIT card programmer built in. It is by far the best I have seen , it can do it all and is very quick. It also has an inbuilt TiT card tester.
When you first open the file it will be set to EDITOR, but there are 5 words across the top, they are.

FILE.....EDITOR......CARD MENU.....PROGRAMMER........ABOUT.


Move your mouse over programmer and click it you will fine 5 options write hex, write eep, erase Tit , write Tit, and lastly TEST Tit.

Have a look and see how you get on.
 
OH BTW

I would use it to erase the tit first as if you get the tit to virgin state you can then update to OS to 103....103 seems to be best.
 
hfathollahi said:
Thank you for your all support , but no success .
I put the carde in the programmer for three hours while titaniumcardprogger was running , but no result .
Also as I said before, I used titanium os updater and nothing more , because it hangs on “ Trapping titanium card ….Please wait “
Click to expand...
hi i had same problem this is how i sorted it:

go here download latest multiprog:

http://www.satellites.co.uk/php-bin...ead.php?t=26648

when installed open multprog then click on MP tab click power off and then select phoenix 3.58MHz

you can now close multiprog and use whichever loader you want. let me know if it works

cheers
 
@sadmadboy

what programmer you use? how you use your programmer with mp?

to other that have sending TRAPCODE

if you got cas3, you can start cas8.7, go to smartcard section. then titanium and there is a option for repair titanium to os 1.3
update to os 1.6 is also available

hope this help some users ;)

regards

keydember
 
Look at the date stamps on the earlier posts - Id imagine he has either given up or found another solution by now!
 
Back
Top