I need help with LNB HOLDER

E

Emiliano de

New Member
My Satellite Setup
I don't have specific settings.
My Location
ALGERIA
I have LNB HOLDER and I want to receive signals from two satellites simultaneously: Eutelsat16E and Hotbird13E. How can I do this given the short distance between them? Has anyone used this method before with this?

support-multifeed-universel-4-lnb-en-acier.webp
 
What size dish, do you have?
 
Any dish diameter larger than around 60cm can use separate LNBs side by side for 3 degree reception.
 
Emiliano de said:
I have LNB HOLDER and I want to receive signals from two satellites simultaneously: Eutelsat16E and Hotbird13E. How can I do this given the short distance between them? Has anyone used this method before with this?

View attachment 166928
Click to expand...

This holder is not suitable.
Here is a better way for an 85 cm off-set dish

na3°.webp
 
Emiliano de said:
How can I do this given the short distance between them?
Click to expand...

Well, Algeria is a big country, but a rough calculation for a ~85cm dish would give a needed LNB-distance (heart to heart) of about 4.4cm, I think.
The shown multifeedholder would have a minimum distance of about 6.8cm?

Apart from that, the one LNB should be positioned clearly higher than the other LNB; rough estimate of 16-23 degrees multifeed tilt of the multifeedrail. That is something to consider too: does the multifeedholder allow this?



Greetz,
A33
 
I used a 3 degree monobloc for that combination, nice easy solution.
www.pulsat.com

Inverto Black Pro 0.2dB 3 Degree Monoblock LNB

INVERTO BLACK PRO 0.2dB 3 DEGREE SINGLE OUTPUT MONOBLOCK LNB High performance, super low threshhold 0.2dB single output monoblock LNB. This monoblock LNB was designed for dual satellite reception. It can be used for satellite broadcast reception of any two satellites spaced with 3° degrees, on...
www.pulsat.com www.pulsat.com
 
Back
Top