Is viasat reachable in west ireland

Chris76 said:
Sunny? lol you will need a 1.8m dish to get viasat m8
Click to expand...

i think more like 2.4m needed to get near 24/7 reception and not one of them cheap fortec star dishes a proper 2.4m solid.
 
I get upto 90% on the viasat sd channels and between 68% and 55% on the hd channels this depends on the time of day and of course the weather iam in south devon and iam using a 1.8 channel master with and inverto black ultra lnb
 
I have a few mates in dublin that have tried with a 1.8 and not getting the HD channels anyway reliable, so i think it's better forget it for now.
 
Well you just have to up the dish size but this will cost.

If the viasat card will work in a vu+ linux receiver you might have more luck due to the better tuner used over the official receiver.
 
I have an interesting observation.

With Titanium LNb and 1.1 m dish I used to get 60 % strength, and 50 % quality, which was good enough to get Viasat Baltic. It does break up severe winds.

When I putted Ulta Inverto LNB, the quality and strength have gone to 90 %, but still get problem with winds.

Why?

Analoguesat said:
I barely get Viasat on a 1m dish in the Scottish Borders (very weak signal disappears at the merest hint of drizzle). You dont have much chance in Belfast.
Click to expand...
 
Problems with winds means your dish is poorly mounted, bad motor (SG2100's backlash can be adjusted) or in exposed position. No LNB will fix that. Make the dish more stable.

Please take a picture.
 
hi everybody, got my 1.8m dish up last night, its some sort of a polish alluminium dish, got 97% on the european beam and nothing on the nordic beam, im in offaly, ireland which is smack bang in the centre of ireland, i will try this evening with my black ultra lnb. i havent touched the elevation on this dish when mounting and i wonder would the elevation make a difference with the nordic beam and do i need a lnb feedhorn to make sure im getting the beam from all of the dish, Please pass on some exp and knowledge, cheers guys!!!
 
Djskutz said:
hi everybody, got my 1.8m dish up last night, its some sort of a polish alluminium dish, got 97% on the european beam and nothing on the nordic beam, im in offaly, ireland which is smack bang in the centre of ireland, i will try this evening with my black ultra lnb. i havent touched the elevation on this dish when mounting and i wonder would the elevation make a difference with the nordic beam and do i need a lnb feedhorn to make sure im getting the beam from all of the dish, Please pass on some exp and knowledge, cheers guys!!!
Click to expand...

I used a meter for the transponder 11747 V 27500 to fine tune the dish.
 
hey chris i was using my technomate 5200 box to try fine tune it, if im picking up the european beam does that mean my elevation is perfect, its a big dish and hard to move when fine tuning, and is ur dish bang on 4.8E or 5E, cheers
 
You will gett he European beam stuff even if the dish is marginally misaligned. They are very strong signals.
 
right were getting somwhere now, so basically i need to go out and do the elevation first and then make sure its right, the pole is level, does this look like itS AT 28.1 DEGrees elevation,Windows Photo Gallery Wallpaper.webp
 
Chris what's your readings on that transponder, just so I have a fair idea
 
Just tried this evening again to get the nordic beam but no joy, either my dish isnt big enough or its just a sh1te dish, all help appreciated
 
1.1m is probably a bit on the small side to get the Nordic beam in Ireland.
 
Hey analogue man, I'm using A non known 1.8m dish, I honestly thought I'd get it but not a thing on it, the dish is probably crap,
 

Analogue man ???? :D

Unless its a decent quality dish its probably performing about like a 1.1m! Sight across it and see if the face is warped. then string the dish - put 3 cotton threads across it and see if they all meet in the middle with minimal gaps between the threads.

There is also the problem that big dishes are difficult to set up well unless you know what you are doing.
 
what size is that dish, looks big, have you a clear sight from trees if so you might need a installer to align it with proffessional meter.
 
It's 190 in height and 175 across, there is trees but I'm getting 97% on the European beam, maybe my technomate isnt picking it up, it's a foreign dish and offset as you can see from my pic
 
Sorry aNalougesat, thought that was your name, theres something not right on this dish
 
ya i get around 97% on 11766h european but no nordic on a 2.4m fortec star dish but its only acting as a 1.4m dish very hard to set up.
 
Back
Top