Octagon sf4008 4k uhd e2 updates 26.05.2019

[victor64]

Then most likely a fused LNB and tuner (which looks to be a plug in device from images in Post 9)

Unplug and see if it then boots up.

As I wrote above , I tried and nothing. Remains in boooting...

 

[Channel Hopper]

Both tuner circuit boards and a USB upgrade ?

 

[victor64]

Both tuner circuit boards and a USB upgrade ?

I give up. I had ordered a new receiver an Octagon SF 8008. I have good experience with them.
Thank you for all your help !

 

[Channel Hopper]

I give up. I had ordered a new receiver an Octagon SF 8008. I have good experience with them.
Thank you for all your help !

No, it does suggest the main board was - also - damaged, which would be difficult to identify and fix for the cost of a more modern receiver.

Did your 4008 have an internal hard drive installed ?

 

[victor64]

No, it does suggest the main board was - also - damaged, which would be difficult to identify and fix for the cost of a more modern receiver.

Did your 4008 have an internal hard drive installed ?

No. I used only external HDD.

 

[Channel Hopper]

Did your 4008 have an internal hard drive installed ?

No. I used only external HDD.

OK. I would have suggested to remove the internal connections in the next message, but you could try to access the content on another device in case that has also been caught/damaged in the discharge.

 

[victor64]

Did your 4008 have an internal hard drive installed ?

OK. I would have suggested to remove the internal connections in the next message, but you could try to access the content on another device in case that has also been caught/damaged in the discharge.

Yes, I will do that. Thank you for the support.

 

[el bandido]