Search the small PCB inside the FIBO motor

S

Snuffer

Regular Member
My Satellite Setup
Skystarcard,Fortec's life time ultra's, MaxPlus 2100's,Dreambox and a Tandberg
My Location
Amsterdam
Hi

I search for the small printed Circuit inside the Fibo motor the one with the optocoupler on it.
The parts are not realy nessesery but the print.
i have a print burning out so perhaps i can rebuilt the motor for his owner.

Plaese look at your stuff perhaps you have one for me.

Thanks in advange.

Ron/Snuffer
 
Hi
Ron/Snuffer

I have looked inside my motor and the only thing I can find is a label inside the cable cover housing.
I'm not sure if this what you are after but the numbers read as follows
9904 130 06802
G31-10.02 32/9
I couldn't see anything else apart from the numbers on the AIRPAX motor,if it is those you want then message me back.
Hope this helps !!

Bob/Dorsetbob
 
I believe that Ron means Printed Circuit board.
 
Hi
Thanks Rolfw
There aren't any numbers on the pcb.All there is is some lettering which reads
CLAUS (if this means anything ? )
 
Yes thats the part 2 Transitors 4 resistors a optocoupler are on this printboard.
And text are claus correct.
 
Hi Ron
I have had another look but still can't see any numbers on the PCB.
Perhaps you could try Fibo.as in Norway for an answer.
They still have these motors in stock.
I have been in contact with them last week and they are very helpful with all sorts of inquiries.
I know that they haven't been making the dishes for 8/9 years but motors and the nylon cogs are still available from them.
Hope this helps.

Bob/Dorsetbob
 
Ron actually wants one of the small PCBs, as the tracks are broken on the one he is trying to repair, but perhaps Fibo still have some spares. Have altered his original post to make it clear. :)
 
dorsetbob said:
Hi Ron
I have had another look but still can't see any numbers on the PCB.
Perhaps you could try Fibo.as in Norway for an answer.
They still have these motors in stock.
I have been in contact with them last week and they are very helpful with all sorts of inquiries.
I know that they haven't been making the dishes for 8/9 years but motors and the nylon cogs are still available from them.
Hope this helps.

Bob/Dorsetbob
Click to expand...
hi do they have a webside or phone number and did they said how much are the motor thanks
 
They do have a web site.
_http://www.fibo.no/
I dont have a price,but use the form on the site and they will get back to you

Bob
 
Bob

I have also some motors but the PCB are in fire so i must have a new board only.
Price from a motor are 150 Euro's for new at the regular shops.
I go change here to the JohnSat option and remove the boards compleet out of the motors thats better for me also in combination with my PC controler for use woith the motors.

Ron
 
Ron

I think that the reed switch option,like you are doing is the way forward(removing the small PCB).
I would do this myself if I had the tools and facilities available to me to do so.
Of course there are also other options to consider.

1. Change the polar mount to fixed and use a diseqc motor
2. Change the polar mount to fixed and use a Jaeger smr 99G motor
3. Install a Jaeger smr 1224 motor including adapter plate
4. Install a Andrews polar mount including adapter plate and use a actuator

All these options I think will work.
What do you think,Ron ?

Bob
 
Bob


That are the options yes correct.

What i will do is use it orginal and compleet.

I make a motor with reed (as JohnSatUK ) and control this by PC.

The only piont is that i can not change the program someone have make for me.

Works great but have no remember the puls insite.
Whit ather words i look for a programmer that will finish a wonderfull option. Hardware are compleet working here. see picture.
 

Attachments

  • Test2.webp
    Test2.webp
    13.3 KB · Views: 46
Hi Ron

Try this link _http://www.pc-user.co.uk/motor-bee_info.htm

I thought this might help if you are going to try to program your software yourself.
It could be the same software

Bob
 
Bob

This unit is what i use with the software you see on the picture.

This software (picture) are working great bud what i miss on it are the part to remember the steps so turning left right slow ast etc are 100%
But i must store the pulsen from the reed, to make this in the program and a sat list that the motor can turn to the sat are the problem i am a technican not a software engineer.

Perhaps i must look for a prof.company and spent some money on it.

Ron
 
Hi Ron

There is another alternative.
You could use a DVB-S card in your pc and connect it to a V-Box to control positioning.

Bob
 
Bob

I use a SS2 card and a Prof 7300 card with the rotor control of MIBI
for about 2 years now and use a Fortec star Ultra for rotor control (best reciever for it ever used here) bud i will do it without a card and with my PC and the program haha

Thanks
 
Back
Top