Titanium Recovery Tool

Status
Not open for further replies.
I believe that it should work on either, but as mentioned earlier, it is a bit hit and miss John.
 
rolfw said:
I believe that it should work on either, but as mentioned earlier, it is a bit hit and miss John.
Click to expand...

Rolfe

Thanks - I'll give it a try on one of the cards.

Nothing by trying!

John
 
i try to use this program today on my crashed blue titanium card ... And i can tell you it workes fine ... my titanium i working again ....
 
I had a Blue Tit card. Tried to erase it with Multiprog 1.8 and Cardproggers of different versions- from 1.[1].10.0 to 1.[1].8.1 - no success, "Unsupported OS found", "No ATR", progger hangs up forever and worked all night, using Centrino 1.6 of my IBM notebook 98%.. I think it's dead, but tried a program from AD teknik site- MP test diagnostic tool. It says- ATR OK, 3B 24 00 30 42 30 30, all other OK, too, except "Fail to send 1+7 bytes". What should I do?
 
I found an queer thread in this theme:

"...I suspect you have confuse your Titanium card with DSTC's research project called Titanium. While the DSTC's project - Titanium has been involved in developing new smart card technology, we do not sell nor offer any smart card with our developed smart card technology.

In answer to your question, a card's ATR can be easily retrieved by just about
any smart card diagnostic tool available. Most smart card readers I know also
included such diagnostic tool. In your case, if you require just the card's
ATR, then you probably find it easier to look what's available under your
smart card reader's driver.

Cheers,
Eddy"

---------- Forwarded message ----------
Date: Wed, 14 Jan 2004 15:40:21 +0100
From: Eugenio Diaz <redersys*cetib.ictnet.es>
Subject: TITANIUM CARD

I have a TITANIUM CARD v 1.02, that I lost de ATR.
When I tray to open whith the Phoenix programer no recognize the tarjet
because do not appears the ATR.
I tray to make MOSC which a program bat I dont have results.
PLS help me!
What I mast do !
Sincerely
 
To use the dynamite software you will need the dynamite programmer,
its no use on other programers.

You can make the dynamite emulate other programers but not the other
way round.
With the dynamite programer you can recover a dead titanium card.
 
Status
Not open for further replies.
Back
Top