bracket for disecq motor

saj1985

saj1985

Member
My Satellite Setup
Dreambox 800HD SE, Dreambox 500S, Skybox F5S, 90cm Solid Dish, Tm2600 Motor, Inverto Black Ultra LNB! :)
My Location
Lost...
hey peeps, i wanted to use the tm2600 (technomate) motor ive got with the fibo 90,
i was wondering where can i get a bracket to connect the dish to the motor?
 
any ideas as to where can i buy it from?
 
Could you show some pictures to understand what exactly should be connected?
 
RimaNTSS said:
Could you show some pictures to understand what exactly should be connected?
Click to expand...

this is the back of the dish where the original motor goes on,
its length is approx 13cm and the width is 7.8cm

i need a bracket to connect to holes on the back of the dish and so i can connect it to the tm2600 disecq motor

hope what im saying makes sense
 

Attachments

  • IMG_20180327_171514412 (1296 x 728).webp
    IMG_20180327_171514412 (1296 x 728).webp
    53.2 KB · Views: 41
I see. I thought you are going to use original polarmount and Fibo motor. So, you probably need to make customized bracket. I will think about it tomorrow.
 
RimaNTSS said:
I see. I thought you are going to use original polarmount and Fibo motor. So, you probably need to make customized bracket. I will think about it tomorrow.
Click to expand...

i am planning to use the original motor but not sure if it works yet,
my father in law is checking it out for me as he's a retired electrician

also the wiring on the fibo motor seems different compared to just one coaxial wire for the technomate motor

how do i go about making one? im so crap when it comes to diy lol
 
saj1985 said:
how do i go about making one? im so crap when it comes to diy lol
Click to expand...
It is never late to start DIY.
To control Fibo motor you need positioner and additional 4 (in some cases 5) wires from room to antenna.
 
RimaNTSS said:
It is never late to start DIY.
To control Fibo motor you need positioner and additional 4 (in some cases 5) wires from room to antenna.
Click to expand...

how much do the positioners normally cost about?

i'll have to keep a look out for one
 
RimaNTSS said:
Not really. That is from my memory. I just sold 2 used positioners for 30 EUR.
Click to expand...

you got any left?

once i find out if the motors working i'll try to get one
 
I have several but also have plans how to use them. Can ask in the shop, maybe they have some new left.
 
saj1985 said:
this is the back of the dish where the original motor goes on,
its length is approx 13cm and the width is 7.8cm

i need a bracket to connect to holes on the back of the dish and so i can connect it to the tm2600 disecq motor

hope what im saying makes sense
Click to expand...

I made sevaral from Moteck and STAB mastclamps .
Also complete one from other material with the dish as close as possible to the rotor .fibo fix moteckmount.webpfix stab clamp.webpshort builded clamp full.webpshort builded clamp parts.webpshort builded clamp topview.webpshort builded clamp.webp
 
These are long gone , but I can build one .
 
see PM
 
all sorted @Trust1 is going to make me a bracket for the fibo and also do me a lnb too

@Trust1 thanks mate i really appreciate it
 
Back
Top