UHD Spain HDR & SDR

Satfaca

Satfaca

Specialist Contributor
My Satellite Setup
Orbitron SX-10 310 cm + H2H motor + ADL RP2-CPOR feed
Prodelin PFA 240 cm + EGIS ProfiTracker + Chaparral PR1 Ku feed
Octagon SF8008 (Twin & Combo) + TBS 6983
Chaparral M140 + Echostar DVR-7000 HDD + Lyngbox
My Location
Melmac
Two new 4K channels started on 11.382 V, SR 30000. In clear.

HDR.webp
SDR.webp
 
I can receive these HEVC channels but when I look for them in 'NEW' Channels I find nothing on both Dreambox Recivers that
is to say DM 900&DM 920, whilst on my Octagon sF008 no problem. Does this means that the DMs cannot decrypt HEVC channels?
 

Attachments

  • UHD Spain.webp
    UHD Spain.webp
    12.1 KB · Views: 17
  • New.webp
    New.webp
    15.9 KB · Views: 18
The fact is that these channels get recognized as "Data", being marked as "Type 32". Try to change that to "31" in the DreamBoxEdit and see if helps...
 
I cant play also with nn2 image and dm900 neither viark droi. Are the same channels that i can receive on dtt in Andalucia. nevertheless with my tv lg can play with dtt witouth problem.

its strange because few days ago only one the channels were in test and can be played by both receivers. I have recorded and info about is:

Video: HEVC 3840x2160 50fps [V: hevc main 10 L5.1, yuv420p10le, 3840x2160]
Audio: MPEG Audio 48000Hz stereo 256kbps [A: Spanish [spa] (mp2, 48000 Hz, stereo, 256 kb/s)]
 
I can scan those two channels on my Edision MIO+ but none of them give a picture. Only sound... can someone confirm if they have the same problem? Thanks!
 
Stevenvc19 said:
I can scan those two channels on my Edision MIO+ but none of them give a picture. Only sound... can someone confirm if they have the same problem? Thanks!
Click to expand...
Yes I do on both my Dreamboxes 900&920UHD but not on my Octagon Sf8008 in which case I have both picture and sound.
(N.B.) I substituted type 32 to 31 on dreamBoxEdit but all I got is the sound so far.
 
must write on openpli or openatv for fix OE2.0
 
Video: HEVC 3840x2160 50fps [V: hevc main 10 L5.1, yuv420p10le, 3840x2160
Level 5.1 on HEVC is NOT supported on a very wide range of 4K receivers....
HD51 being one of them...
 
MCelliotG said:
Video: HEVC 3840x2160 50fps [V: hevc main 10 L5.1, yuv420p10le, 3840x2160
Level 5.1 on HEVC is NOT supported on a very wide range of 4K receivers....
HD51 being one of them...
Click to expand...
Is this hardware related? Or can it be fixed with some sort of firmware upgrade for the decoder?
 
Good reception here,
New UHD on 30 west working on my Octagon SX88-4K 88cm dish.
 
Hardware related, unfortunately. Only via stream on PC/mobile where a software encoder takes over.
 
Now I got picture on my Edision OS MIO+ 4K
Maybe they adjusted the video codec! Give it another try for those who didn’t get a picture the first time!
 
Yes, something has changed, however I still see level 5.1 in the codec info, so something else is going on... how strange. :-doh
Anyway, two screencaps
uhdhdr.webpuhdsdr.webp
 
OK, now I have discovered what has changed. The initial transmission was HDR/SDR type 32
Code: 
0x20 HEVC UHD digital television service with HDR and/or a frame rate of 100 Hz, 120 000/1 001 Hz, or 120 Hz, or any combination of HDR and these frame rates.
and many receivers had problems with the frame rate, as most SOCs will support up to 60Mhz.
Now they changed to
Code: 
0x1F 50/60 Mhz HEVC digital television service
which is compatible in a wider range of commercial 4K receivers.
 
Looks like these channels are gone…
anyone else who has noticed this?
 
Back
Top