Advice Needed Freesat, strong signal, 146 channels found but none are watchable.

RichofYorkshire

New Member
My Satellite Setup
Panasonic Freesat TV, standard sat dish
My Location
Bridlington
Hi could your hive mind help me please?

I have just moved into a new house with my old Panasonic Freesat Tv, there was a Dish already on the wall.

I have plugged the TV in and gone through auto setup. It found Astra 2 and has a good signal and found lots of channels. and the channel list is there, it even has descriptions of the programmes. Sadly, when I click on the programmes it comes up with 'no service'.

It seems a bit weird does any body have any ideas?

Thank you in advance

Richard
 

Attachments

  • IMG_5089.webp
    IMG_5089.webp
    632.9 KB · Views: 19
  • IMG_5090.webp
    IMG_5090.webp
    626.2 KB · Views: 19
  • IMG_5092.webp
    IMG_5092.webp
    511.2 KB · Views: 15
  • IMG_5094.webp
    IMG_5094.webp
    558.3 KB · Views: 14
  • IMG_5095.webp
    IMG_5095.webp
    731 KB · Views: 16
  • IMG_5096.webp
    IMG_5096.webp
    823.7 KB · Views: 16
  • IMG_5097.webp
    IMG_5097.webp
    802.8 KB · Views: 16
  • IMG_5098.webp
    IMG_5098.webp
    610.3 KB · Views: 18
  • IMG_5099.webp
    IMG_5099.webp
    485.7 KB · Views: 17
  • IMG_5100.webp
    IMG_5100.webp
    373.4 KB · Views: 14
Most likely the dish was previously used with Sky Q, which uses a different type of LNB that isn't fully compatible with the TV. A photo of the dish and LNB will confirm this. Swapping the LNB for a 'mk4 Sky quad' usually solves the issue.
 
This is the dish.
 

Attachments

  • IMG_5101.webp
    IMG_5101.webp
    302.6 KB · Views: 17
  • IMG_5102.webp
    IMG_5102.webp
    413.4 KB · Views: 17
  • IMG_5103.webp
    IMG_5103.webp
    738.2 KB · Views: 18
You will get some channels on one of the cables if you carry out a full / slow scan.
 
Most likely the dish was previously used with Sky Q, which uses a different type of LNB that isn't fully compatible with the TV. A photo of the dish and LNB will confirm this. Swapping the LNB for a 'mk4 Sky quad' usually solves the issue.
This is the dish and LNB.
Thanks in advance.
 

Attachments

  • IMG_5101.webp
    IMG_5101.webp
    302.6 KB · Views: 8
  • IMG_5102.webp
    IMG_5102.webp
    413.4 KB · Views: 8
  • IMG_5103.webp
    IMG_5103.webp
    738.2 KB · Views: 8
An easier but more expensive option is to replace the box with a Freesat 4K receiver which supports the Sky Wideband LNBs. No ladders required.
 
What a brilliant forum this is, thank you all very much. Where is the best brand and place to buy a new LNB?
 
You probably want one with multiple outputs such as this:
eBay
 
You probably want one with multiple outputs such as this:
eBay
I have just moved into a new house with my old Panasonic Freesat Tv, there was a Dish already on the wall.

It would be good for the forum to have info on Panasonic Freesat TV models with multiple satellite inputs.
 
Back
Top