new Bosnian package in T2MI

Status
Not open for further replies.
Lexzie said:
This is the output, so astra-sn does not do his job? (Config below)

log.set({ stdout = true, debug = true, syslog = "astra", })
Click to expand...
more debugging will be needed to find out at which step astra-sm stops working, or OE2.0 is not suitable for FPGA
 
What does 'not suitable for FPGA' mean?
It worked on all other T2-MI streams
Is this one different?
 
FPGA - Field programmable gate array
had to be used in DM920 due to the use of two CAM module readers
Code: 
<4>[    2.221568] register adapter
<4>[    2.225479] fpga init
<4>[    4.267127] fpga prog done
<4>[    4.272158] using fpga version 47
<4>[    4.272467] fp: uart recv error 98
<4>[    4.272853] swd: status is 0, pls check
<4>[    4.272856] swd: cannot init port
 
That doesn't explain for me how that relates to the Bosnian T2-MI package and why that package is different to other T2-MI package which work on OpenPLi.

How can I debug more?
 
Lexzie said:
I do not understand what to do.


I guess I have to test it on other hardware or an other image.
Click to expand...
hi lexzie, sorry for the trouble, if possible, information on whether you managed to solve the Bosnian channel on 33E, I have dm two and dm920, I tried in every way and nothing .both receivers are multistream, if you succeeded, if possible, the advice is inside the openatv 6.4 image, thank you
 
mbas68 said:
hi lexzie, sorry for the trouble, if possible, information on whether you managed to solve the Bosnian channel on 33E, I have dm two and dm920, I tried in every way and nothing .both receivers are multistream, if you succeeded, if possible, the advice is inside the openatv 6.4 image, thank you
Click to expand...

If no one has reported success then the answer is no. Be patient. Someone may figure it out in time. If not then you do without unless you buy a receiver that is known to work.
 
Last edited:
mbas68 said:
hi lexzie, sorry for the trouble, if possible, information on whether you managed to solve the Bosnian channel on 33E, I have dm two and dm920, I tried in every way and nothing .both receivers are multistream, if you succeeded, if possible, the advice is inside the openatv 6.4 image, thank you
Click to expand...
Like Analoguesat said, and as you could have read, I have not succeeded in receiving the Bosnian T2-MI package on 33°E.
Due to persone circumstances I am not able to try out another receiver or other images in the near future.
 
Last edited:
I have SF4008, OpenATV 6.4 image. Yesterday I got the T2-MI working at 33°E, but the Abertis channels stopped working at 30°W. What should I look for the error? thank you for the advice
 
Working on osmini4k and satdreamgr 8!

dasto_semtel.jpg
 
Unfortunate

screenshot-6-jpg.147960
 
Could someone help me,

I have never been able to scan this on my Octagon SX88+. When using the credentials 11442H 17500 I get no signal and when I scan this aswell as using T2MI PID 4095 I still get no signal and no channels are found when the scan completes. This receiver is capable of scanning this transponder as william-1 has demonstrated. I have the latest firmware installed on the receiver (1.05.96).

One of the things you can do on the Octagon SX88+ is change the symbol rate to 0 and the signal shows up even if the transponder is broadcasting DVB-SX or NS4 which the receiver isn't capable of scanning. When I change the credentials to 11442 H 0 I get a solid signal lock albeit slightly weak (signal quality shows as 33%).

Am I not able to scan this because 33% signal quality is too weak?
Also when I input the T2MI PID to 4095 it reverts back to 8191 after the scan is complete, is this normal on the Octagon SX88+?

I have also tried a factory reset but this fails to resolve the problem.
 
Last edited:
Delete 11442H from the transponder list and try to find the transponder using blindscan
 
EnoSat said:
Delete 11442H from the transponder list and try to find the transponder using blindscan
Click to expand...

I have tried both of these suggestions. Still no luck :(

Is it normal for the Octagon SX88+ to pick up 11442 H on blindscan?
 
Yes, the 11442H is DVB-S2 only
 
mikeisyou said:
I have tried both of these suggestions. Still no luck :(

Is it normal for the Octagon SX88+ to pick up 11442 H on blindscan?
Click to expand...
When using a Primo (nearly identical to SX88+) for the T2MI transponders on 14°W I had to blindscan with MTS On and then manually scan the transponder for TV only. My Primo no longer works so I can't check if it works on 33°E.
 
ozumo said:
When using a Primo (nearly identical to SX88+) for the T2MI transponders on 14°W I had to blindscan with MTS On and then manually scan the transponder for TV only. My Primo no longer works so I can't check if it works on 33°E.
Click to expand...

With MTS on and TV only scan selected does not scan in any channels. The only point at which I have signal on 11442 H is when the symbol rate is set to 0. Scanning with a symbol rate set to 0 produces no channels aswell. I think its a problem with my box
 
mikeisyou said:
With MTS on and TV only scan selected does not scan in any channels. The only point at which I have signal on 11442 H is when the symbol rate is set to 0. Scanning with a symbol rate set to 0 produces no channels aswell. I think its a problem with my box
Click to expand...
I vaguely remembered that sometimes fiddling with the transponder details would suddenly cause a transponder to lock and found this:

Eutelsat 5 West B - reception reports

As already mentioned in this thread the Transalpine has a very high fade at the edge of the footprint so even a 180 cm dish will not find this signal. I guess I'm way too lucky then, since the fade outside the official footprint is high, then in reality I must be officially covered, as the...
www.satellites.co.uk www.satellites.co.uk
But the transponders mentioned are multistream rather than T2MI. Do you have any other receivers that can lock the Bosnia transponder?
 
Status
Not open for further replies.
Back
Top