Eutelsat 10B
- Thread starter solly
- Start date
Satfaca
Specialist Contributor
- My Satellite Setup
- Orbitron SX-10 310 cm + H2H motor + ADL RP2-CPOR feed
Prodelin PFA 240 cm + EGIS ProfiTracker + Chaparral PR1 Ku feed
Octagon SF8008 (Twin & Combo) + TBS 6983
Chaparral M140 + Echostar DVR-7000 HDD + Lyngbox
- My Location
- Melmac
This new 10B is p.ss..g me off.
I've been trying to research the mess with the signals & beams in the 11.300-11.450 range but issues are getting even bigger.
For instance 11.380 V (FS lists it as 11.382V); I locked two different streams here. Most of the time is this one:
But I also got this one:
It looks like alternating between transport & Continous mode. Or?!
I've gone and finally installed the TS Analyzer to get some more info... everything reminds much on the 11.376 H & 11.377 V listed on FS.
I've been trying to research the mess with the signals & beams in the 11.300-11.450 range but issues are getting even bigger.
For instance 11.380 V (FS lists it as 11.382V); I locked two different streams here. Most of the time is this one:
But I also got this one:
It looks like alternating between transport & Continous mode. Or?!
I've gone and finally installed the TS Analyzer to get some more info... everything reminds much on the 11.376 H & 11.377 V listed on FS.
Last edited:
Satfaca
Specialist Contributor
- My Satellite Setup
- Orbitron SX-10 310 cm + H2H motor + ADL RP2-CPOR feed
Prodelin PFA 240 cm + EGIS ProfiTracker + Chaparral PR1 Ku feed
Octagon SF8008 (Twin & Combo) + TBS 6983
Chaparral M140 + Echostar DVR-7000 HDD + Lyngbox
- My Location
- Melmac
More crazy stuff here ... 11.376 H, listed as CNN Europe on FS ... once I get it analyzed as CNN, next time as CNBC.
Satfaca
Specialist Contributor
- My Satellite Setup
- Orbitron SX-10 310 cm + H2H motor + ADL RP2-CPOR feed
Prodelin PFA 240 cm + EGIS ProfiTracker + Chaparral PR1 Ku feed
Octagon SF8008 (Twin & Combo) + TBS 6983
Chaparral M140 + Echostar DVR-7000 HDD + Lyngbox
- My Location
- Melmac
EnoSat
Specialist Contributor
- My Satellite Setup
- TBS-5927/5925/5220 , Dreambox , Edision , Mutant , Octagon , Uclan
- My Location
- Slovakia
The biggest problem with current cards is that they do not read the mode intended for identification.
For example, 11375.58 H from the card uses 3 modes (Activated option - Update modulation info):
but the card analyzes only one mode (stream)
When you feed the same signal to the e2 box, it analyzes another mode (identification)
or
where the spot number is already indicated
PS:1 Subsequently, addressing of the processing of the stream(s) on the IP bus of the modem begins
For example, 11375.58 H from the card uses 3 modes (Activated option - Update modulation info):
but the card analyzes only one mode (stream)
When you feed the same signal to the e2 box, it analyzes another mode (identification)
or
where the spot number is already indicated
PS:1 Subsequently, addressing of the processing of the stream(s) on the IP bus of the modem begins
Last edited:
hvdh
Specialist Contributor
- My Satellite Setup
- Dr.HD F16, TBS 5927, T-55, Laminas 120 cm
- My Location
- Oss, NL (5.5°E 51.8°N)
Recently, Eutelsat website shows downlink coverage maps for 10B as well:
"HTS Downlink" and "GMS Downlink" (what is GMS?) seem to be composites of the many spot beams that both HTS payloads provide.
A map for Widebeam Ku-band, for continuity of 10A existing customers as they say it, is still missing.
Satbeams shows it, however.
A map for Widebeam Ku-band, for continuity of 10A existing customers as they say it, is still missing.
Satbeams shows it, however.
satesco
Specialist Contributor
- My Satellite Setup
- seven antennas,one toroidal with 16 lnbs,
6 satellite receivers,2 Meters,9 PC cards(tbs6983,6903,6590,6504,6522,6209,2603,6909X,6903X,6902se,skystar hd2),2 tuners usb-tbs5927 & tbs5925,Skystar HD.
Satellite reception between 100.5E-50.0W
- My Location
- Romania
Thanks, @hvdh for the link.Recently, Eutelsat website shows downlink coverage maps for 10B as well:
"HTS Downlink" and "GMS Downlink" (what is GMS?) seem to be composites of the many spot beams that both HTS payloads provide.
A map for Widebeam Ku-band, for continuity of 10A existing customers as they say it, is still missing.
Satbeams shows it, however.
GMS-maybe Google Mobile Service(?)
Joolz
Member
- My Satellite Setup
- 1.2M CM on Motor + 1.8M PF TBS5927 + 5980 + 6909 and lots of poorly positioned trees!
1m Astro 66°E - 63°W
- My Location
- South Yorkshire
EnoSat,
Great information. Please can you confirm the E2 Image and box you used for this?
Dušan Šmigic
Member
- My Satellite Setup
- Dreambox DM800PVR
Gibertini OP150
Superjack 1224AZEL
- My Location
- Serbia, Belgrade
Maybe Gateway
EnoSat
Specialist Contributor
- My Satellite Setup
- TBS-5927/5925/5220 , Dreambox , Edision , Mutant , Octagon , Uclan
- My Location
- Slovakia
EnoSat
Specialist Contributor
- My Satellite Setup
- TBS-5927/5925/5220 , Dreambox , Edision , Mutant , Octagon , Uclan
- My Location
- Slovakia
Do not forget that it is not broadcasting, but testing of transponders for work with DVB-IP
SimonE
Regular Member
- My Satellite Setup
- 1.2m CM dish with elevation jack, Supermount 1224 H-H rotator, Octagon SX88+, DR.HD D15, GT Media Combo, Ku PLL LNB, C Band: Titanium C1W-PLL, Ka Band: XMW R9216AF with FD9000 feedhorn, Inverto Saorsat LNB and Inverto Ka/Ku LNB . Zone 2 dish pointing at 28E with Octagon SF8008.
- My Location
- Gloucestershire, UK
Robert, on the 3E I get Nyota TV on 4032 RHC and on 10E I get MonCloud TV on 4027 RHC and Tchad TV on 3860 RHC. These must be the easiest to lock as I only have a 1.2m CM dish.
Thanks, but I have a 1.8m dish and I wanted to get East African local channels.
suedschwede
Member
- My Satellite Setup
- 2.7m Laminas+Polarmount+JPC-Posi+SF8008
- My Location
- DE
Exactly, these are the strongest transponders on the two satellite positions 
suedschwede
Member
- My Satellite Setup
- 2.7m Laminas+Polarmount+JPC-Posi+SF8008
- My Location
- DE
current scans on the position and what/how many channels are found (date/time is not correct 
)
)